Research paper list

 

V. Grigoriev, T. V. Koval, V.P. Kukhta, P. Raharjo, and K. Uemura, “Transport and Focusing of a Low-Energy Electron Beam in Low-Pressure Ionized Argon”, Technical Physics, 53, 1, 99-104(2008).

P. Raharjo, K. Uemura, N.N. Koval, V. Shugurov, V. Denisov, and V. Jakovlev, W. Setiawan, and M. Utama, “Application of Large Area Plasma Cathode Electron Beam for Natural Rubber Vulcanization”, Proceedings of 15th International Symposium on High Current Electronics, Tomsk, Russia (2008), pp. 492-496.

Kensuke Uemura, Vladimir Kukhta, Purwadi Raharjo, and Eiji Osawa, “A New Carbon Reaction: Conversion of Isotropic Graphite into Carbon Nano-Onion Particles”, Proceedings of 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia, (2008), pp. 241-245.

永田精機（株）、Purwadi Raharjo、 植村賢介、（有）ナノ炭素研究所、大澤映二、低電圧高 流密度パルス電子ビーム装置によるナノオニオンの生成、 2008.

Okada A., Uno Y., Uemura K., Raharjo P., McGeough J.A., Surface modification for orthopaedic titanium alloy by wide-area electron beam, Proc. IMechE Vol. 221 Part B: J. Engineering Manufacture, pp. 173-178 (2007).

Raharjo P., Uemura K., Kukhta V., Koval N., Vacuum Pulsed Discharge For Crack Removal In Superhard Alloy, The Proceedings of the 10th International Conference on Gas Discharge Plasmas and Their Applications, Russia, Tomsk, pp.353-356(2007).

Kukhta V., Uemura K., Brigadin A., Shalnov K., Purwadi R., Osawa E., Pulsed Power Discharge: Method For Preparation Of Nanoparticles, The Proceedings of the 10th International Conference on Gas Discharge Plasmas and Their Applications, Russia, Tomsk, pp.404-407(2007).

Koval N., Sochugov N., Devyatkov V., Grigoriev S., Arslanov I., Mikov A., Podkovyrov V. and Uemura K., Automated Power-Complex for Pulse Surface Treatment of Material by Electron Beam, The Proceedings of the 2nd International Congress on Radiation Physics and Chemistry of Inorganic Materials, High Current Electronics, and Modification of Materials with Particles Beams and Plasma Flows, Tomsk, Russia, pp.51-54 10-15 September (2006).

Uemura K., Commercialization of Russian Original Technologies in Japan, Proceedings of International Conference "Global Engineering Education and Research" devoted to the 110th Anniversary of Foundation of Tomsk Polytechnic University and the century of the first graduation of Siberian Engineers. Tomsk, Russia pp. 24-33 June 1-6 (2006).

Kukhta V., Raharjo P., Uemura K., Grigoriev V., Koval T., Electron Beam Transport and its Symmetric Energy Distribution, The Proceedings of the 2nd International Congress on Radiation Physics and Chemistry of Inorganic Materials, High Current Electronics, and Modification of Materials with Particles Beams and Plasma Flows, Tomsk, Russia, pp.15-18. 10-15 September (2006).

Raharjo P., Uemura K., Borovkov A., Durable SiC Honeycomb Dies for Diesel Fuel Emission with Electron Beam Irradiation, The Proceedings of the 2nd International Congress on Radiation Physics and Chemistry of Inorganic Materials, High Current Electronics, and Modification of Materials with Particles Beams and Plasma Flows, Tomsk, Russia pp.408-411, 10-15 September (2006).

V. Kukhta et al, 8th CMM Tomsk, Russia, 10-15 Sept. p.15 (2006). Grigoryev S., Koval N., Shalnov K., Uemura K., Surface Treatment of WC-Co dies with Low Energy High Current Electron Beam Irradiation Preparation, Proceedings of 8th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia, 8, pp. 255-257 (2006).

Rubstein A., Trakhtenberg I., Volkova E., Vladimirov A., Gontar A., Uemura K., The interrelation between structure and mechanical properties of CNx (0< x <0.5) coatings obtained by graphite arc sputtering, Diamond and Related Materials. 14, pp.1820-1823 (2005).

Uno Y., Okada A., Uemura K., Raharjo P., Furukawa T., Karato K., High-efficiency finishing process for metal mold by large-area electron beam irradiation, Precision Engineering 29,pp. 449-455 (2005).

Raharjo P., Surface Modification of Die Using Large Area Electron Beam Irradiation, Press Technology Vol.43, No.4 (2005).

Uno Y., Uemura K., Tonak S., 精密仕上げ加工用総けい工具のTiB2インプラント処理, Machines & Tools, (Japanese), pp.78-82 (2005).

Okada A., Uno Y., Nishina K., Uemura K., Raharjo P., Sano S., Zhanbo Yu, High Efficiency Surface Finishing of Metal Mold by Large-area Electron Beam Irradiation (2° Report)  Smoothing of Tilting Surfaces and Surface Modification Effect, Precision Engineering Society, Vol. 71, No.11, pp. 1399-1403 (2005).

Grigoriev V.P., Uemura K., Koval T.V., Electron beam self-focusing control in breakdown plasma by external magnetic field, Plasma Conference at Poland (2005).

Rubshtein A., Trakhtenberg I., Vladimirov A., Kurennykh T., Plotnikov S., Bakunin O., Uemura K., Wear Study of Diamond-like Carbon Coating by Rutherford Backscattering of Deuteron (E= 900 keV), 11th RPC, Oral Session 1-B, Radiation methods of non-destructive testing of materials and objects, pp.91-93 (2004).

佐藤公亮、宇野義幸、岡田晃、仁科圭太、植村賢介、Purwadi Raharjo, 大面積電子ビーム照射による金属表面の組織変化, The Journal of Japan Society of Electrical-Machining Engineers, pp.67-70(2004).

Okada A., Uno Y., Yabushita N., Uemura K., Raharjo P., High efficient surface finishing of bio-titanium alloy by large-area electron beam arradiation, Journal of Materials Processing Technology 149, pp.506-511(2004).

Yoshiyuki Uno, Okada Akira, Kensuke Uemura, Purwadi Raharjo, “ Development of high efficiency surface finishing of mold without hand polishing by large-area electron beam irradiation”, Tool Engineer 48, 8, pp. 42-45(2004). (in Japanese)

P. Raharjo, K. Uemura, A. Okada, Y. Uno, “ Application of Large Area Electron Beam Irradiation for Surface Modification of Implant Materials”, Proceedings of 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia, (2004), pp. 267-270.

Akira Okada, Yoshiyuki Uno, Kohsuke Sato, Ken Hachinota, Kensuke Uemura, Purwadi Raharjo, “A New Surface Finishing Process for Bio-Titanium Alloy Products by Wide-Area Electron Beam Irradiation”, J. of the Japan Society of Electrical Machining Engineers，Vol. 38, No.89, (2004) pp27-34.

P. Raharjo, K. Uemura, A. Okada, Y. Uno, “ Application of Large Area Electron Beam Irradiation for Surface Modification of Metal Dies”, Proceedings of 7th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia, (2004), pp. 263-266.

Okada Akira, Yoshiyuki Uno, Noriyasu Yabushita, Kensuke Uemura, Purwadi Raharjo, “Smoothing of EDMed surface of precise metal mold by large-area electron beam irradiation”, Die and Mold Technology, 18, 8 ,pp 104-105 (2003).

Trakhtenberg I., Vladimirov A., Rubstein A., Kuzmina E., Uemura K, Gontar A., Dub S., The analysis of microhardness measurement approach for characterization of hard coatings, Diamond and Related Materials. 12, pp.1788-1792 (2003).

Okada Akira, Yoshiyuki Uno, Noriyasu Yabushita, Kensuke Uemura, Purwadi Raharjo, “Study of High efficiency finishing process on machined mold surface by large-area electron beam irradiation (1st Report) -Possibility of Smoothing of EDMed Surface and Analysis of Fundamental Machining Characteristics”, Journal of The Japan Society for Precision Engineering, 69, 10 (2003) (in Japanese).

Yoshiyuki Uno, Akira Okada, Kensuke Uemura, Purwadi Raharjo,” New surface finishing of precision mold by maximum-60 mm large area electron beam irradiation”, Tool Engineer, 10 (2003).

Akira Okada, Yoshiyuki Uno, Kensuke Uemura, Purwadi Raharjo and Toshihiko Furukawa, Surface Modification of EDMed Surface by Wide-area Electron Beam Irradiation, Proc.of the 18th American Society for Precision Engineering Annual Meeting, (2003), pp172-175.

A. Okada, Y. Uno, N. Yabushita, K. Uemura, and P. Raharjo, “Study on Surface Finishing of Metal Mold by Large-area Electron Beam Irradiation”, Proc. of the International Conference on Leading Edge Manufacturing in 21st Century, Niigata (2003).

Yoshiyuki Uno, Akira Okada, Noriyasu Yabushita, Kensuke Uemura, Purwadi Raharjo, “Mold Surface Finishing and Modification by Large-Area Pulsed Electron Beam”, Meeting of the Japan Society of Electrical-Machining Engineers, Tokyo, (2003), pp. 12-17.

Raharjo P., Wada H., Nomura Y., Ozur G., Proskurovsky D., Rotshtein V., Uemura K., Pulsed Electron Beam Technology for Surface Modification of Dental Materials, Proceedings of 6th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia, pp.679-682 (2002).

Akira Okada, Yoshiyuki Uno, Yabushita, Kensuke Uemura, Purwadi Raharjo, “Study on Surface Finishing of Dies by Using Large Area Electron Beam”, Proceedings of the National Meeting of Japan Society of Electrical-Machining Engineers, Saitama, (2002), pp.57-60.

Trakhtenberg I., Bakunin O., Korneyev I., Plotnikov S., Rubstein A., K.Uemura, Substrate surface temperature as a decisive parameter for diamond-like carbon film adhesion to polyethylene substrates, Diamond and Related Materials. 9, 711-714 (2000).